Medical and Dental Consultantsí Association of Nigeria
Home - About us - Editorial board - Search - Ahead of print - Current issue - Archives - Submit article - Instructions - Subscribe - Advertise - Contacts - Login 
  Users Online: 1691   Home Print this page Email this page Small font sizeDefault font sizeIncrease font size
 
ORIGINAL ARTICLE
Year : 2019  |  Volume : 22  |  Issue : 11  |  Page : 1475-1482

Evaluation of shear bond strength of zirconia-based monolithic CAD-CAM materials to resin cement after different surface treatments


1 Department of Prosthodontics, Faculty of Dentistry, Istanbul University, Istanbul, Turkey
2 Department of Prosthodontics, Faculty of Dentistry, University of Health Sciences, Istanbul, Turkey

Correspondence Address:
Dr. B Altan
Department of Prosthodontics, Faculty of Dentistry, Istanbul University, Istanbul
Turkey
Login to access the Email id

Source of Support: None, Conflict of Interest: None


DOI: 10.4103/njcp.njcp_157_19

Rights and Permissions

Objective: To compare the shear bond strength of resin cement to zirconia-based monolithic CAD-CAM materials subjected to different surface treatments. Methods: 2 brands of monolithic zirconia blocks (Vita YZ HT, Sirona inCoris TZI), yttrium-stabilized tetragonal zirconia (IPS e.max ZirCAD) and zirconia-reinforced lithium silicate ceramic (Vita Suprinity) were divided into six groups according to the surface treatment received: no treatment (control), HF acid etching, sandblasting, sandblasting + Er:YAG laser irradiation, Er:YAG laser irradiation and CoJet. Composite resin cylinders were bonded to blocks with self-adhesive resin cement (Theracem). Shear bond strength was evaluated after thermocyling. Failure modes were examined using SEM. Data was analyzed statistically by using 2-way ANOVA and post-hoc Tukey's test (P < 0,05). Results: The bond strength was significantly affected by the surface treatment and the type of CAD-CAM blocks (P < 0,001). Surface treatment with CoJet revealed significantly higher bond strength compared to sandblasting in Y-TZP and monolithic zirconia specimens. Conclusions: Monolithic zirconia blocks showed higher bond strength values compared to Y-TZP zirconia block in sandblasting and CoJet groups. HF acid etching is more effective than sandblasting and CoJet for Vita Suprinity.


[FULL TEXT] [PDF]*
Print this article     Email this article
 Next article
 Previous article
 Table of Contents

 Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
 Citation Manager
 Access Statistics
 Reader Comments
 Email Alert *
 Add to My List *
 * Requires registration (Free)
 

 Article Access Statistics
    Viewed366    
    Printed18    
    Emailed0    
    PDF Downloaded115    
    Comments [Add]    

Recommend this journal