|Year : 2019 | Volume
| Issue : 7 | Page : 977-981
Three-dimensional bone grafting in dental implantology using autogenous bone ring transplant: Clinical outcomes of a one-stage technique
MO Yuce1, E Adali2, G Turk3, G Isik1, T Gunbay1
1 Departments of Oral and Maxillofacial Surgery, Faculty of Dentistry, Ege University, Izmir, Turkey
2 Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Izmir Democracy University, Izmir, Turkey
3 Department of Prosthodontics, Faculty of Dentistry, Ege University, Izmir, Turkey
|Date of Acceptance||18-Feb-2019|
|Date of Web Publication||11-Jul-2019|
Dr. E Adali
Department of Oral and Maxillofacial Surgery, Faculty of Dentistry, Izmir Democracy University, PO Box 35140, Karabaglar, Izmir
Source of Support: None, Conflict of Interest: None
| Abstract|| |
Background: An insufficient bone volume at the maxillary anterior region often restricts dental implant treatment and commonly leads to poor aesthetic outcomes. The defective site requires bone grafting as an initial surgical intervention before dental implant placement. In dental implantology, reconstructing osseous defects using autologous block bone grafts, biomaterials, or a combination of both is a routine surgical procedure. This study aims to evaluate the efficacy of autogenous, symphyseal, bone ring block grafts after the augmentation of defective sockets and clinical application of grafts in the maxillary anterior region with immediate insertion of a dental implant in a single surgical procedure. Materials and Methods: The study included eight patients (five females and three males) with 12 defective sockets. The technique included removing the bone from the chin region for transplant, fitting the three-dimensional bone rings in the prepared sockets of the maxillary anterior region, and screwing the dental implants through the rings. Patients underwent postoperative clinical examinations every day during the first week and then every month for 6 months. Results: In two cases, the wound dehisced but healed by secondary intervention during the follow-up period. In one case, the ring graft sequestrated because of infection in postoperative month 2, the osseous defect was reconstructed with biomaterials. The remaining cases healed with no infection, and no other case failed during the first year. Conclusion: This technique showed promising and advantageous results, and thus, could be an alternative treatment to other autogenous graft techniques, particularly for defective sockets.
Keywords: Autogenous bone block, bone ring technique, ring block graft
|How to cite this article:|
Yuce M O, Adali E, Turk G, Isik G, Gunbay T. Three-dimensional bone grafting in dental implantology using autogenous bone ring transplant: Clinical outcomes of a one-stage technique. Niger J Clin Pract 2019;22:977-81
|How to cite this URL:|
Yuce M O, Adali E, Turk G, Isik G, Gunbay T. Three-dimensional bone grafting in dental implantology using autogenous bone ring transplant: Clinical outcomes of a one-stage technique. Niger J Clin Pract [serial online] 2019 [cited 2019 Jul 22];22:977-81. Available from: http://www.njcponline.com/text.asp?2019/22/7/977/262534
| Introduction|| |
In the maxillary anterior region, performing bone augmentation before dental implant placement to achieve an adequate bone volume has become routine with predictable and good aesthetic outcomes., Tooth loss owing to trauma, periodontal disease, or pathological malformation is followed by a natural bone resorption process, leading to reduced height and width of the alveolar crest. Nevertheless, because of the long-term absence of a tooth, the volumes of hard and soft tissues become deficient. Horizontal defects can be reconstructed with predictable clinical results; however, reconstructing vertical defects can be very challenging.
Various different techniques have been described for reconstructing hard tissue defects such as onlay bone grafting, guided bone regeneration, and distraction methods.,, An ideal augmentation technique must be selected considering the morphology of the defect at the planned implant site. A two-stage procedure is commonly indicated for an insufficient bone volume in the alveolar ridge where dental implant treatment is planned.,
Reconstructing localized alveolar defects in the aesthetic region requires horizontal and/or vertical augmentation of autologous bone grafts, which is considered the gold standard of bone grafting procedures.,, Because of its osteoinductive, osteoconductive, and osteogenic properties, autogenous bone block grafting is ideal for three-dimensionally reconstructing alveolar defects.
The selection of donor sites depends on the required volume of bone replacement. Extraoral sites, such as calvarial bone, iliac crest, ribs, cranium, and proximal tibia, are used when a significant volume of bone is required for reconstruction. The mandibular symphysis, ramus, and maxillary tuber region are suitable as local/intraoral donor sites for corticocancellous bone grafts.,,
The bone ring technique permits three-dimensional reconstruction of alveolar bone defects in the aesthetic zone with ring-shaped autogenous bone grafts harvested from the symphysis and simultaneous dental implant placement in a one-stage procedure. We hypothesized that bone ring technique using autogenous, symphyseal, bone ring block grafts in the esthetic zone will result a predictable and successful outcome with no incidence of postoperative infection after 1 year clinical evaluation.
| Materials and Methods|| |
The study cohort included eight patients (five females and three males) who required dental implant rehabilitation in the maxillary anterior region. All selected patients had a bony defect at the site of the planned implants and all were clinically and radiologically indicated for horizontal and vertical bone augmentation. Patients with a history of hemorrhagic diathesis, use of bisphosphonates, infectious diseases such as human immunodeficiency virus infection, and irradiation to the head and neck region were excluded. The study was in accordance with the Helsinki Declaration, and the study protocol was approved by the institutional ethics committee before patient selection (26/10/2015, registration number: 15-9/8).
Before surgery, all selected patients signed consent forms that included details regarding the surgery and possible complications, and all patients underwent periodontal and dental examinations to achieve clinically acceptable oral hygiene. Radiographic examinations were performed using cone beam computed tomography with the Kodak Dental Imaging Software (Kodak 9000 3D CBCT system, Kodak Carestream Health, Trophy, France). The dimensions of the recipient site and the association of the remaining apical bone with the nasal floor and/or maxillary sinus were evaluated to determine the required autogenous bone volume for the transplant.
All procedures were conducted by one experienced surgeon under local anesthesia (Ultracaine DS Forte, Sanofi-Aventis; articaine hydrochloride 4%; epinephrine, 1:100000). A midcrestal incision with a vertical releasing incision was made at the recipient site and the full thickness of the buccal mucoperiosteal flap was raised to expose the defective alveolar ridge [Figure 1]. The defective socket was measured using a trephine bur (Meisinger USA LLC, Centennial, CO, USA) [Figure 2]. In all patients, the chin region was selected as the donor site. An incision was made between the mandibular canine teeth and 5 mm below the attached gingiva and intraoral sulcular, and the flap was then reflected. A 1-mm internal diameter trephine bur was selected to remove the bone cylinder, this diameter was more than that of the defect in the recipient site. While performing osteotomy at the donor site, attention was paid to the tips of the mandibular incisors. After creating the bone ring discs, implant osteotomy was performed in the centre of the ring graft under copious irrigation, while being careful not to perforate the lingual side [Figure 3]. A ring lifter was then used to harvest the ring block graft, which was kept in a sterile saline solution until the recipient site was prepared. The defective area was first prepared using the trephine bur to fit the bone ring transplant to the recipient area. Using the bone ring graft as a drill guide, the remaining apical bone of the defective socket was prepared using instruments included with the Ankylos implant system (Dentsply Sirona, York, PA, USA). After positioning the graft, the planned implant was inserted through the bone ring and then fixed and immobilized [Figure 4]. All implants were checked for initial stability. Finally, a cover screw was secured, and the sharp edges of the bone graft were smoothed by rounding the ring graft margin with a rounded burr. Then, the augmented area was covered with a barrier membrane for extra protection against the bone resorption process, and the area was primarily closed. Antibiotics (amoxicillin 1000 mg, every 12 h), analgesics, and anti-inflammatory drugs (naproxen sodium 550 mg, every 8 h) were prescribed for 7 days postoperatively. Patients underwent clinical examinations every day for the first week and then every month for 6 months postoperatively to check for the presence or absence of infection, dehiscence, and soft tissue shrinkage.
|Figure 3: Implant osteotomy was performed in the centre of the ring graft under copious irrigation|
Click here to view
| Results|| |
The study cohort included eight patients (five females and three males) with 12 defective sockets [Table 1]. All defective sockets were in the maxillary anterior region, and the chin region was selected as the donor site for all cases. A total of 12 bone ring grafts were harvested: Seven with a diameter of 7 mm and five with a diameter of 6 mm. All harvested bone ring grafts were rigidly fixed in place with the planned implant. All inserted implants were initially stable immediately after surgery.
In the 2nd postoperative month, one bone ring graft failed because of infection. This patient had lost his teeth because of periodontal disease. However, because there was sufficient volume of residual bone, the implant had osseointegrated into the apical zone and the defective area was filled during a second surgical intervention. In the 6th postoperative month, a panoramic examination was conducted, and surgery for placement of the healing cap was performed under local anesthesia for all patients. After 1 week, the healing cap was removed, and after a sequence of prosthetic treatments, a definitive restoration was successfully placed. All implants were followed up for 1 year after prosthetic restorations to evaluate the implant durability after loading [Figure 5].
|Figure 5: All implants were followed up for 1 year after prosthetic restorations to evaluate the implant durability after loading|
Click here to view
| Discussion|| |
Although an inadequate bone volume in defective sockets limits successful dental implant placement, improvements in clinical techniques and biomaterials have increased the indications for dental implant reconstruction.,, A number of techniques such as distraction osteogenesis, guided bone regeneration, and onlay grafting have been described for augmenting bony defects. Autogenous bone transplantation is the gold standard for reconstruction.,,,
Autogenous bone grafts, which have osteoinductive, osteogenic, and osteoconductive properties, undergo less resorption and have high concentrations of bone morphogenetic proteins and growth factors., Because of the disadvantages of harvesting extraoral bone grafts, such as greater resorption, morbidity at the donor site, need for general anesthesia, extended surgical duration and prolonged hospitalizzation, intraoral donor sites have become more popular than extraoral donor sites. In addition, intraoral harvesting of the donor bone is less stressful for the patient; thus, intraoral donor sites are commonly preferred by surgeons for bone transplantation. The selection of an intraoral donor region is generally dependent on the required volume of replacement bone and on the anatomical situation of the patient. In this study, we preferred the chin region as the donor site because of easier access and a lower morbidity incidence. Moreover, a graft from the chin contains more cancellous bone than other intraoral donor sites provides a greater amount of osteoprogenitor cells., Three to five bone rings for intraoral augmentation can be obtained from the chin region. However, attention must be paid to adjacent vital structures, including dental roots, nerves, and vessels. In this study, no postoperative complication occurred in any patient because of harvesting a symphysis graft.
The bone ring technique, first reported by Giesenhagen and Yüksel in 2010, provides three-dimensional augmentation with simultaneous implant placement in a one-stage procedure.,, Moreover, the treatment period required for this technique is shorter than with that for other onlay grafting techniques because it does not require a second surgical intervention after graft consolidation., While preparing the implant bed, the surgeon uses two trephine cutters of different diameters to provide a snug fit of the bone ring transplant within the recipient site. The placed implant provides stabilization and fixation of the transplanted bone ring graft so that there is no need for additional fixation with osteosynthesis screws.,,
Proximity and stabilization of the onlay graft/recipient site are vital for adequate healing of the graft. Streckbein et al. reported that partial harvesting of cylindrical grafts from the retromolar region of the mandible and preparing the recipient site according to the graft geometry maximized the contact surface of the graft and recipient site. To ensure success of the one-stage technique, graft healing is very important because graft failure implies implant failure., Hence, an onlay graft must be rigid and immobile to prevent bone volume loss. Particularly in the aesthetic region, bone ring grafts enhance the soft tissue contour by increasing the bone volume. The technique used in this study aimed to achieve a satisfactory outcome in the defective sockets in the maxillary anterior region. Omara et al. reported optimal wound healing at both the donor and recipient sites in all patients, with no incidence of postoperative infection. Similarly, in this study, the donor and recipient sites achieved normal postoperative healing, thus the hypothesis of this study was accepted. However; one patient developed an infection in the postoperative 2nd month because of wound dehiscence. In this case, although the bone ring graft was mobile, the dental implant had osseointegrated into the apical zone. Because the bone ring graft completely failed, a second surgical intervention was performed to fill the defective area with an allograft. A clinical examination conducted after 1 week found no signs of erythema, suppuration, or infection.
Omara et al. examined the bone ring transplant cases radiographically immediately and at 6 months postoperatively. They measured crestal bone changes and reported minimal crestal bone resorption in the linear measurement during the follow-up period. Distinctively, in this study, bone ring technique could be only clinically evaluated, radiological evaluations could not be included because of the limitations of the study.
In conclusion, this one-stage technique provides a more practical approach for autogenous bone grafting. However, future studies are required to further evaluate the advantages and disadvantages of this technique, as well as better assess the long-term clinical outcomes.
Financial support and sponsorship
Conflicts of interest
There are no conflicts of interest.
| References|| |
Yu H, Chen L, Zhu Y, Qiu L. Bilamina cortical tenting grafting technique for three-dimensional reconstruction of severely atrophic alveolar ridges in anterior maxillae: A 6-year prospective study. J Craniomaxillofac Surg 2016;44:868-75.
Stimmelmayr M, Beuer F, Schlee M, Edelhoff D, Güth JF. Vertical ridge augmentation using the modified shell technique--a case series. Br J Oral Maxillofac Surg 2014;52:945-50.
Masaki C, Nakamoto T, Mukaibo T, Kondo Y, Hosokawa R. Strategies for alveolar ridge reconstruction and preservation for implant therapy. J Prosthodont Res 2015;59:220-8.
Omara M, Abdelwahed N, Ahmed M, Hindy M. Simultaneous implant placement with ridge augmentation using an autogenous bone ring transplant. Int J Oral Maxillofac Surg 2016;45:535-44.
Tekin U, Kocyigit DI, Sahin V. Symphyseal bone cylinders tapping with the dental implant into insufficiency bone situated esthetic area at one-stage surgery: A case report and the description of the new technique. J Oral Implantol 2011;37:589-94.
Jensen SS, Terheyden H. Bone augmentation procedures in localized defects in the alveolar ridge: Clinical results with different bone grafts and bone-substitute materials. Int J Oral Maxillofac Implants 2009;24:218-36.
Salama H, Salama M. The role of orthodontic extrusive remodeling in the enhancement of soft and hard tissue profiles prior to implant placement: A systematic approach to the management of extraction site defects. Int J Periodontics Restorative Dent 1993;13:312-33.
Misch CM. Comparison of intraoral donor sites for onlay grafting prior to implant placement. Int J Oral Maxillofac Implants 1997;12:767-76.
Khoury F, Hanser T. Mandibular bone block harvesting from the retromolar region: A 10-year prospective clinical study. Int J Oral Maxillofac Implants 2015;30:688-97.
Streckbein P, Kähling C, Wilbrand JF, Malik CY, Schaaf H, Howaldt HP, et al
. Horizontal alveolar ridge augmentation using autologous press fit bone cylinders and micro-lag-screw fixation: Technical note and initial experience. J Craniomaxillofac Surg 2014;42:387-91.
Draenert FG, Huetzen D, Kämmerer P, Wagner W. Bone augmentation in dental implantology using press-fit bone cylinders and twin-principle diamond hollow drills: A case series. Clin Implant Dent Relat Res 2011;13:238-43.
Stimmelmayr M, Güth JF, Schlee M, Göhring TN, Beuer F. Use of a modified shell technique for three-dimensional bone grafting: Description of a technique. Aust Dent J 2012;57:93-7.
Kaufman E, Wang PD. Localized vertical maxillary ridge augmentation using symphyseal bone cores: A technique and case report. Int J Oral Maxillofac Implants 2003;18:293-8.
Cordaro L, Amadé DS, Cordaro M. Clinical results of alveolar ridge augmentation with mandibular block bone grafts in partially edentulous patients prior to implant placement. Clin Oral Implants Res 2002;13:103-11.
Basa S, Varol A, Turker N. Alternative bone expansion technique for immediate placement of implants in the edentulous posterior mandibular ridge: A clinical report. Int J Oral Maxillofac Implants 2004;19:554-8.
Khamees J, Darwiche MA, Kochaji N. Alveolar ridge augmentation using chin bone graft, bovine bone mineral, and titanium mesh: Clinical, histological, and histomorphomtric study. J Indian Soc Periodontol 2012;16:235-40.
] [Full text]
Canalis E. Effect of growth factors on bone cell replication and differentiation. Clin Orthop Relat Res 1985;193:246-63.
Nkenke E, Schultze-Mosgau S, Radespiel-Tröger M. Morbidity of harvesting of chin grafts: A prospective study. Clin Oral Implants Res 2001;12:495-502.
Rosenthal AH, Buchman SR. Volume maintenance of inlay bone grafts in the craniofacial skeleton. Plast Reconstr Surg 2003;112:802-11.
Phillips JH, Rahn BA. Fixation effects on membranous and endochondral onlay bone graft revascularization and bone deposition. Plast Reconstr Surg 1990;85:891-7.
Pikos MA. Mandibular block autografts for alveolar ridge augmentation. Atlas Oral Maxillofac Surg Clin North Am 2005;13:91-107.
Giesenhagen B, Yüksel O. Einzeitig behandeln mit Knochenringen. Vertikale Augmen-tation und Implantation in nur einem Eingriff. Implantol J 2010;14:50-2.
Stevens MR, Emam HA, Alaily, ME Sharawy M. Implant bone rings. One-stage three-dimensional bone transplant technique: A case report. J Oral Implantol 2010;36:69-74.
Marx RE. Bone and bone graft healing. Oral Maxillofac Surg Clin North Am 2007;19:455-66.
[Figure 1], [Figure 2], [Figure 3], [Figure 4], [Figure 5]