Medical and Dental Consultantsí Association of Nigeria
Home - About us - Editorial board - Search - Ahead of print - Current issue - Archives - Submit article - Instructions - Subscribe - Advertise - Contacts - Login 
  Users Online: 435   Home Print this page Email this page Small font sizeDefault font sizeIncrease font size
Year : 2017  |  Volume : 20  |  Issue : 12  |  Page : 1610-1617

Evaluation of vertical marginal adaptation of provisional crowns by digital microscope

Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Kingdom of Saudi Arabia

Correspondence Address:
Dr. M Q Al Rifaiy
Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh
Kingdom of Saudi Arabia
Login to access the Email id

Source of Support: None, Conflict of Interest: None

DOI: 10.4103/1119-3077.196083

Rights and Permissions

Objective: To investigate and compare the degree of vertical marginal discrepancy of four provisional crown materials by digital microscope. Materials and Methods: A total of 100 provisional crowns were fabricated on standardized resin dies by direct technique of provisional fabrication, using four different provisional materials (n = 25): Provisionals Fabricated by Systemp® c and b II, ivoclar vivadent, Schaan, Liechtenstein (group A); ProtempTM Plus, 3M ESPE, Neuss, Germany (group B); Success CD, PROMEDICA, Neumunster, Germany (group C); and Trim® Plus, Bosworth Company, Illinois, USA (group D). The provisional crowns were finished, tried, and locked with a customized device under 15N of vertical axial force. The vertical marginal discrepancy between the crown margin and the resin die was measured in micrometers using digital microscope (KH-7700, Hirox-USA, Inc., NJ, USA) at mid of buccal, lingual, mesial, and distal margin areas by a trained technician. Results: The mean values obtained for each group were as follows: group A = 129.10 ± 41.64, group B = 123.36 ± 40.94, group C = 89.67 ± 25.34, and group D = 107.24 ± 38.32. Assessment by post hoc Tukey's test at 5% significance level showed a statistically significant difference (P < 0.05) between group C and group D with the other groups. Results of one-way ANOVA showed a statistically nonsignificant difference (P > 0.05) between the means of the four areas of measurement for each group. Conclusion: Marginal discrepancy of the group C (Success CD) was the lowest among the provisionals tested. The mean vertical marginal gap values for the materials tested were found to be with in the clinically acceptable range (<130 μm).

Print this article     Email this article
 Next article
 Previous article
 Table of Contents

 Similar in PUBMED
   Search Pubmed for
   Search in Google Scholar for
 Related articles
 Citation Manager
 Access Statistics
 Reader Comments
 Email Alert *
 Add to My List *
 * Requires registration (Free)

 Article Access Statistics
    PDF Downloaded301    
    Comments [Add]    

Recommend this journal